产品banner
your current location : HOME >> Products >> Forged Pipe Fittings

Contact usContact Us

Yangzhou Maode Machinery Co., Ltd.

TEL:+86-17205109808

Landline:+86-514-82777558

Emailcarl@yzmaode.com

Address:www.yzmaode.com  

Threaded Cross

Threaded Cross

  • category:Forged Pipe Fittings
  • Views:
  • Release date:2023-11-06 09:41:34
  • Product description

Socket weld cross is also called socket weld four-way fitting that used to make three 90 degree branches  main run pipeline. Both equal  reducing crosses are in various size, dimensions  material. The Socket Weld Fittings Section is designed to hold the various sizes of the pipes it has to be attached to.


Socket Weld Fittings are a family of high pressure forging fittings that used only in conjunction with ANSI Pipe  are available in the same size range.


Even though there are some similarities between the shapes of the two welds, but socket weld is still considered to be different  a fillet weld.


ASME B16.11 Socket Weld Cross Tee Size

TypeSocket Weld Equal  Reducing Cross Tee
Size Range1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4"
Pressure RatingClass 3000 / 6000 / 9000, 3M / 6M / 9M, 3000 LBS / 6000LBS / 9000LBS

Socket Weld Cross Material


Carbon Steel Grades

ASTM A105 / A105N, A350 LF2/LF3, A694 F42 / F46 / F56 / F60 / F65


Alloy Steel Grades

ASTM A182 F5 / F9 / F11 / F12 / F22 / F91 / F92


Stainless Steel Grades

ASTM A182 F304/304L/304H, F316/316L, F321, F310S, F317, F347, F904L


Duplex Stainless Steel Grades

ASTM A182 F51 / F53 / F44 / F55


ASME B16.11 Socket Weld Cross Dimensions 

1698472896040.jpg


1698472934245.jpg


1) The even thickness around the socket bore shall  be less than the average value, the thickness at partial areas can be the min. one.


2) Considering the tolerance of outside diameter of pipe, the diameters of some socket bore can be a little larger than the ones specified in B16.11.


3) When the sizes of the connecting pipes aren t conformed to the ones specified in this catalog, the sizes of the connecting pipes shall be provided in the purchase specification.


4) When the fittings are reducing,the structure sizes shall be same as the ones of the straight fittings  B J D shall be machined per the according reducing ends.


5) Fittings can also be manufactured as the mixed connectings of SW  THRD.


Socket Weld Cross Weight Chart in KG

1698473004180.jpg



Tag

Previous:Socket Weld Tee2023-10-28
Next:Socket Weld Cross2023-10-28
Copyright © Yangzhou Maode Machinery Co., Ltd.
service support:Simi Network