ASME/ANSI B16.9 45 degree elbow have same function usage with 90 degree elbow, but the dimension shape is half of it. There is long radius only. The material can be carbon steel, alloy steel stainless steel. It is quite used in multiple industries such as chemical, petroleum, electronic, fluid power, shipyard, oil gas.
There are 3 types that socket weld elbow, butt weld elbow threaded elbow.ASME/ANSI B16.9 45 degree butt weld elbow is common used due to the large range of outside diameter thickness.
Buttwelding Fittings are used in a piping system to change direction function of media, to branch off, reduce pipe size attach auxiliary equipment. They are availbale in multiple types as elbow, tee, cap, reducer, Lap joint stub end oelt, that produced in cold hot forming based on ASTM A403 ASTM A234 specification. We usually make the end bevelling for welding easily on site.
Inspection Package of ASME B16.9 45 Degree Elbow
Before delivery, we will pack the 90° elbow purchased by the customer with length, wall thickness Angle. Those less than 8 inches will be packed in wooden cases, those larger than 8 inches will be packed with wooden brackets.
What does ASME B16.9 Mean?
ASME B16.9 Standard covers overall dimensions, tolerances, ratings, testing, markings for factory-made wrought buttwelding fittings in sizes NPS 1 ∕ 2 through NPS 48 (DN 15 through DN 1200). It covers fittings of any producible wall thickness. This standard does cover low pressure corrosion resistant buttwelding fittings. See MSS SP-43, Wrought Stainless Steel Butt-Welding Fittings.
Specification of ANSI B16.9 45 Degree Elbow Fitting
Size Range | 1/2"- 80" / DN15 - 2000 |
Thickness Schedule | SCH 10, 20, 40, STD, XS, 80, 100, 120, 140, 160, XXS |
Standard | GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409, ANSI / ASME B16.9, MSS SP 43, JIS B2311/2312/2313, EN10253, DIN2605/2615/2616/2617, EN10253 |
Carbon Steel Grades | ASTM A234 WPB/WPC, A420 WPL6, A860 WPHY 42 / 46 / 56 / 60 / 65 |
Alloy Steel Grades | ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92, 15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5 |
Stainless Steel Grades | ASTM A403 WP304/304L/304H, 316/316L, 310S, 317, 347, 904L |
Duplex Stainless Steel Grades | ASTM A815 S32205, S31803, 32750, 32760 |
ASME B16.9 45 Degree Elbow Long Radius Drawing Weight
Notes:
1) Besides these, GB/T 10752 SH 3408 SH 3409 HG/T 21635 HG/ T 21631 SY/T 0510 DL/T 695 EN 10253 etc.are also applied.
2) The elbow with NPS over 80 shall be made subject to the sizes agreed by purchaser manufacturer.